Yaesu Fusion DR-1X – Wires-X configuration
My experience setting up WiresX on a Yaesu Fusion DR-1X Repeater
My experience setting up WiresX on a Yaesu Fusion DR-1X Repeater
Exploring new things, received the HRI-200 Interface and my Wires-X ID today. Repeater is running in Auto/Fix(FM) until Yaesu releases a upgrade which is expected Q1-16.
The N0IAI Repeater is on the air servicing Harrisonville and surrounding areas.
Looking to go beyond the capabilities of Chirp or just looking for commercial software to program your Yaesu FT-8800. The FTB8800 package by G4HFG may just be the ticket.
My journey into the world of Digital Mobile Radio (DMR)
Pic from the 2015 Joplin MO Hamfest parking lot flood
Lessons learned setting up the FT-991 for digital modes with Kieber Burgos PY7KB
Quick post on a Yaesu DVS-6 Voice Keyer module install in a FTdx3000
Messing around with the appearance and some of the behind the scenes aspects of the site.
Yaesu has released a new version of the FTdx3000 PC Control application.
Just a quick note to spread the word, new FTdx3000 firmware has been released.
I was unable to get low band dipoles up before winter hit and frankly I was just tired of antenna work. With better weather I have experimented with a couple solutions, read on to learn more.
How to setup the FTDX3000 and HRD for FSK RTTY
Headsets are awesome and best of all don’t need to cost several hundred dollars.
Build your own protection using MOV’s and save a bundle.
Don’t resort to pilling gear, build a simple riser to make better use of what you have.
Free your hands with this simple to make foot switch.
It is a two-fer, fun to build and a great tool for antenna work. Build yourself this PC based antenna analyzer without breaking the bank.
Trying to keep my shinny 100ft lightning rod from damaging gear.
Ran across this on another blog I follow and wanted to share. Hams love towers and the photography is awesome.
Copyright © 2024 | WordPress Theme by MH Themes