
MMDVM Hotspot Build
After buying my first Hotspot (a ZumSpot) I became enamored with the possibilities presented by Pi-Star. I have since experimented and have build several simplex […]
After buying my first Hotspot (a ZumSpot) I became enamored with the possibilities presented by Pi-Star. I have since experimented and have build several simplex […]
Having to manually drive the rotor has become a pain as I have to keep an eye on the rotor controller while also occupying a […]
Setting up WSJT-X can be be a struggle if all the hardware and settings do not align. Based on a question by a reader a […]
With the release of SmartSDR 1.10.8.39 it is now possible to have the amp band track the radio directly no PC or PC software needed. […]
With winter approaching it is time to make improvements to my antenna setup for 160m. The current Inverted V with its high angle of radiation […]
On the heals of the my QSL card creation experience I spent an evening putting together a Ham business card, aka a Eyeball QSL card. […]
I initially started with an old desktop system that I had laying around and it got the job done. However it was noisy, had rotating […]
Introduction I received an Arduino Nano as a gift and I was looking for ways to put it to use around the Ham shack. I […]
How to Build a Microphone extension for less than $15
My experience setting up WiresX on a Yaesu Fusion DR-1X Repeater
Exploring new things, received the HRI-200 Interface and my Wires-X ID today. Repeater is running in Auto/Fix(FM) until Yaesu releases a upgrade which is expected Q1-16.
The N0IAI Repeater is on the air servicing Harrisonville and surrounding areas.
Headsets are awesome and best of all don’t need to cost several hundred dollars.
Build your own protection using MOV’s and save a bundle.
Don’t resort to pilling gear, build a simple riser to make better use of what you have.
Copyright © 2023 | WordPress Theme by MH Themes