Yaesu Fusion DR-1X – Wires-X configuration


Full Wires-X functionality is not present at the UR the Wires-X button does not function as expected. If the Wires-X software is configured to treat the DR-1X as a Digital capable radio it does not function correctly. Suspect that the repeater firmware does not have the logic implemented.

As the Wires-X software is expecting a certain behavior from what it thinks is a radio and the DR-1X does not behave as expected, it does not function. The Analog setup as detailed above is the work around until Yaesu releases updates.

73 Until next time, Jay

You may also like...

2 Responses

  1. Mike says:

    Thank you so much for taking the time to share. That is truly in the spirit of Amateur Radio, and I tip my hat to you.

    Brunswick, Maine

Leave a Reply

Your email address will not be published. Required fields are marked *